linux-charlotte (2.6.35-13.42) lucid; urgency=low

  [ Kamal Mostafa ]

  * Tracker of 42 upload for charlotte
    - LP: #863686

  [ Upstream Kernel Changes ]

  * Revert "charlotte: config: enable NTFS"
    - LP: #828886

 -- Kamal Mostafa <kamal@canonical.com>  Tue, 04 Oct 2011 12:08:52 -0700

linux-charlotte (2.6.35-13.41) lucid; urgency=low

  [ Acelan Kao ]

  * charlotte: pm: The USB power pin should not pull up before clk
    - LP: #822774

  [ Ike Panhc ]

  * Tracker of 41 upload for charlotte
    - LP: #862235

  [ Kamal Mostafa ]
  * Rebased to remove the set of 500+ ENGR commits listed in the 2.6.35-13.39
    changelog entry; they were not intended to be included.  The tags
    oem/kernel/charlotte/39 and /40 can be used to fetch the actual released
    branches for those versions.
    - LP: #862235

 -- Kamal Mostafa <kamal@canonical.com>  Fri, 30 Sep 2011 13:53:44 -0700

linux-charlotte (2.6.35-13.40) lucid; urgency=low

  [ AceLan Kao ]

  * (config) add FUSE support
    - LP: #828886

  [ Ike Panhc ]

  * Tracker of 40 upload for charlotte
    - LP: #861977

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 29 Sep 2011 17:14:01 +0800

linux-charlotte (2.6.35-13.39) lucid; urgency=low

  [ Acelan Kao ]

  * Revert "sched: Remove irq time from available CPU power"
  * Revert "sched: Do not account irq time to current task"

  [ Kamal Mostafa ]

  * Tracker of 39 upload for charlotte
    - LP: #811179
  * Rebase to Ubuntu-2.6.35-30.58
    - dropped this conflicting commit in favor of upstream replacement:
        c64d420 Applying: Apply UVC driver patch
  * update configs

  [ Upstream Kernel Changes ]

  * ENGR00133182 esdhc: do not use clk_disable in ISR context
  * ENGR00133593 ePXP: make clk_disable() be called only in process context
  * ENGR00133669: MXC: Ensure some clock APIs can be called in process
    context only.
  * ENGR00133481-1 [MX28] eMMC Write failed on MX28 boards
  * ENGR00133481-2 [MX28] eMMC Write failed on MX28 boards
  * ENGR00133702-3 usb host1: Add usb host1 low power and wakeup support
    for mx28
  * ENGR00133726 vpu: make clk_disable() be called only in process context
  * ENGR00133639 IPUv3:Support YUYV and UYVY interlaced input frame
  * ENGR38305845-1 NAND : make the mil_ecc_read_oob() reads the whole OOB
    by default
  * ENGR38305845-2 NAND : add our own bbt descriptor
  * ENGR00133792 NAND : remove the unused field : raw_oob_mode
  * ENGR00133795-1 FSL Dev:Add CVBS support for TVin platform data
  * ENGR00133795-2 MX53 ARD:Support ADV7180 TVin
  * ENGR00133795-3 ADV7180:Support CVBS input on Ain1
  * ENGR00133658 PTP: Improvement and supplemental check for i.MX28 1588
  * ENGR00133850 MX53 TO2: enable ARM SRPG
  * ENGR00133864 esdhc: move clk_enalbe out of spin_lock
  * ENGR00132712-1: Add ZQ calibration support
  * ENGR00132712-2 Add ZQ calib in defconfig
  * ENGR00133862: Mx50: Drop Vcc voltage to 1.05V in LPAPM mode
  * ENGR00133905 MX53 ARD: increase VDDGP and VCC voltages in suspend mode
  * ENGR00133884 eMMC: improve boot_info message output
  * ENGR00133906-1 DMA : add dumping code for DMA
  * ENGR00133906-2 NAND : remove the DMA dumping code
  * ENGR00133908 NAND : fix the wrong size for memcpy in
    mil_ecc_write_page()
  * ENGR00133240 MX50 TO1 mDDR at 24 MHz in LPAPM mode
  * ENGR00133909-1 MX28: add VBUS 5v regulator
  * ENGR00133909-2 MX28: add VBUS 5v regulator
  * ENGR00133955 MX50: dma apbh incorrect ioremap size
  * ENGR00133729 ePxP: move clk_[en|dis]able outside spinlock section
  * ENGR00133978 PM: add time sensitive debug function to suspend & resume
  * ENGR00133918 mx50: ZQ calibration should be run only on mx50 platform
  * ENGR00133970 MX5x: Z160 GPU revision check
  * ENGR00134056-1 MSL: mx28 add low power mode and wakeup support for otg
    port
  * ENGR00134056-2 usb: add low power mode and wakeup support for mx28 otg
    port
  * ENGR00133979 PTP: Add information check for MX28 1588 TX timestamp
  * ENGR00132603-1 mxc_iim: Add mach support for sense and fuse function in
    mxc_iim
  * ENGR00132603-2 mxc_iim: Add driver code for sense and fuse function in
    mxc_iim
  * ENGR00134018 v4l2 output: get exact di fmt for DC format.
  * ENGR00134043-1: PM: change device suspend time debug driver to default
    off.
  * ENGR00134043-2 PM:enable device suspend time mx3/5
  * ENGR00134077-1 Add TVE 1080P30/25/24, 1080I60/50 support for iMX53
  * ENGR00134077-2 Add TVE 1080P30/25/24, 1080I60/50 support for iMX53
  * ENGR00134048 GPMI: Need more clocks in LPM mode on MX508
  * ENGR00133542: MX50- Enable SRPG support for TO1.1 chips
  * ENGR00134179 mx50 rdp: set VSD regulator always on
  * ENGR00134202-1 DMA : add a macro to fill the DMA command word1
  * ENGR00134202-2 GPMI : replace the old code with the new macro
  * ENGR00134150 GPU: destroy device in workqueue for error interrupts
  * ENGR00133828-1: MX50 EVK: Shutting down VUSB2 in suspend causes USB
    failures
  * ENGR00133828-2: MX50 EVK: Fix FEC GPIO/IOMUX settings in suspend mode.
  * ENGR00134203-1 IPUv3 VDI:de-interlacing improvement
  * ENGR00134203-2 V4l2 output:de-interlacing improvement
  * ENGR00134220 NAND: fix up the chip select handling
  * ENGR00134154-1 MSL: add sync between usb resume and usb wakeup thread
    for mx28
  * ENGR00134204 MX5x bug fix No INT generation in Multi-blk operations
  * ENGR00133860 - MSL: EPDC data pin GPIO numbers off by 1
  * ENGR00134041 [MX53] Add the SATA AHCI temperature monitor
  * ENGR00133052 MX53: Fix system hang in vpu decoding with iram.
  * ENGR00126516 L2Switch: Fixed port learning function issue
  * ENGR00126514 L2Switch: Fixed the warning information report issue
  * ENGR00134277 MX50: turn off the ZQ calibration config
  * ENGR00133794 - EPDC fb: Make IOCTL functions accessible from kernel
    modules
  * ENGR00133793 - EPDC fb: Use a default temp index of 0
  * ENGR000135959: MX50: Relock PLL1 to 160MHz in LPAPM mode.
  * ENGR00135048-1: Fixed bugs in common sw bus frequency scaling code.
  * ENGR00135048-2: MX50: Added support for bus-frequency scaling.
  * ENGR00134285 LDB:Correct the way to match registered fb info
  * ENGR00134193-1 TIMER: Fix i.MX28 set wrong match value of timer
  * ENGR00134193-2 MX28: Fix FEC can't found phy after fix timer issue
  * ENGR00136004 iMX28: set NO_HZ and preempt as default config
  * ENGR00136022: MXC:Fixed bugs in bus_frequency driver.
  * ENGR00135971 GPU: move clk_enable/disable out of timer handler
  * ENGR00136097-1 pmic mc13892: Add PWRON3 power event support
  * ENGR00136097-2 mx50 rdp: add support to addon board's power key event
  * ENGR00136146-1 MX53 TO2 ARD: Change VDDGP and VCC values
  * ENGR00136146-2 MX53 TO2 ARD: Changed R2 value for reulator SW2 and LDO2
  * ENGR00136150 IIM:Remap user defined size of IIM registers
  * ENGR00136101-1 MX50: Export timeout value to turn off ePxP clock when
    inactive
  * ENGR00136101-2 MX50: Only kick the clock off timer in irq handler.
  * ENGR00136108 PTP: Revise and supplement for MX53 1588 driver
  * ENGR00136170 MX50: Add ZQ calibration revision for TO1.1
  * ENGR00134274 - EPDC fb: Optimize update flow by merging compatible
    updates
  * ENGR00136195 MX28-MSL: fix AHB clock divider issue
  * ENGR00136202 MX50: Finetune DLL delay paramater for LPDDR2
  * ENGR00136218 FEC: Fix dhcp fail when enable preempt at mx28
  * ENGR00136219 MX28: Fix keypad can't wake up system
  * ENGR00136223 MX50 Fix epdc display issue via PAN_DISPLAY after resume
  * ENGR00136190: MX50 RD1: Incorrect IOMUX settings break WVGA display
  * ENGR00136231: Read MAC ID from the IIM fuses for SMSC911x driver
  * ENGR00136875-1 Add function pgprot_writethru()
  * ENGR00136875-2 make video buffer cacheable to improve video performance
  * ENGR00136914 mx53-ard: add platform data assignment for usb host h2
  * ENGR00136921 FEC: Fix nfs not works after kernel suspend and resume on
    i.MX28
  * ENGR00136931 LDB clk:Correct LDB clk round/set rate
  * ENGR00136909: MX50: Drop DDR freq to 133Mhz when AHB is at medium
    setpoint.
  * ENGR00136939-1: SPI:Fix suspend/resume issue on MX50 RDP
  * ENGR00136939-2: MX50: Fix suspend/resume issue on MX50 RDP
  * ENGR00137058 ipuv3:update DP SRM by MCU if FG disable for FG position
    setting
  * ENGR00136990-1 MX50: fix system resume failure issue due to ZQ
    calibration
  * ENGR00136990-2 MX50: Add sys interface to control ZQ calib run interval
  * ENGR00136941 MX50: Fix crash issue caused by ePxP when playback video
  * ENGR00137101-1 clock : keep GPMI and BCH working in the same frequency
  * ENGR00137101-2 NAND : change the field `is_onfi_nand` to `is_ddr_ok`
  * ENGR00137101-3 NAND : add TOGGLE NAND device info to the table
  * ENGR00137101-4 GPMI : change the is_onfi_nand() to is_ddr_nand()
  * ENGR00137101-5 GPMI : add TOGGLE NAND support
  * ENGR00137101-6  mark the erase failed block to the bbt table.
  * ENGR00137099 - EPDC fb: Fix bug related to panning + Queue update
    scheme
  * ENGR00136986 vpu: Disable IRAM in default imx5_defconfig
  * ENGR00137175 usb-otg: DO NOT read usb registers when usb is in low
    power mode
  * ENGR00137221 MXC V4L2:Show streaming/overlay status via sys fs
  * ENGR00136035 MX28 ALSA: Pcm read error during arecording and aplaying
  * ENGR00137259-1 NAND : share the same code for ONFI and TOGGLE nand
  * ENGR00137259-2 NAND : remove `onfi_ddr_mode`
  * ENGR00137158 ipuv3: fix flash issue by first setting FG position
  * ENGR00137167 ipuv3 fb: keep yoffset as current fb base addr
  * ENGR00137270-1 GPMI : add a separate DMA starting function with BCH
    interrupt
  * ENGR00137270-2 GPMI : use start_dma_with_bch_irq() to replace old code
  * ENGR00137270-3 GPMI : add a DMA starting function called in non-BCH
    context
  * ENGR00137270-4 GPMI : replace the old code with
    start_dma_without_bch_irq()
  * ENGR00136994 UBI : system halt when detaching UBI in NFS environment
  * ENGR00137339 PTP: Synchronize fec1 timer to fec0 timer in i.MX28
  * ENGR00137362-1 L2Switch: Add ENET-MAC interrupt resource
  * ENGR00137362-2 L2Swtich: Add phy support for switch port1 and port2
  * ENGR00137388 NAND: Correct flash-based BBT version
  * ENGR00137424 GPMI : remove the event reporting code
  * ENGR00137439 GPMI : remove the empty lines
  * ENGR00137443 USB: Dynamic management usboh3 clock in suspend/resume
  * ENGR00137472-1 GPMI : spilit the hack code from the mil_scan_bbt()
  * ENGR00137472-2 GPMI : remove mil_set_mtd_geometry()
  * ENGR00137458 MX53 SMD: Add MSL support
  * ENGR00137161 MX28-MSL: PSWITCH interrupt should be enabled after
    suspend fails
  * ENGR00137479 NAND : change the `pagesize` field from 8192 to 0 for ONFI
    NAND
  * ENGR00136942 FEC: Fix resume fec trigger transmit timeout
  * ENGR00137487 GPMI : remove fake_ecc_layout
  * ENGR00137485-1 MMA8451: Add mma8451 accelerometer driver
  * ENGR00137485-2 iMX53_SMD: Enable MMA8451 accelerometer sensor
  * ENGR00137495 MX53 LOCO: Add MSL support
  * ENGR00137496 GPMI : add alloc/free DMA buffer functions
  * ENGR00137447-1 mx53 evk MSL: add hdmi cable detect irq number
  * ENGR00137447-2 MSL edid: add mxc edid header file
  * ENGR00137447-3 ipuv3: change video mode timming adjust method
  * ENGR00137447-4 edid: mxc edid operation modification
  * ENGR00137447-5 sii9022 edid: add edid and cable detect support in
    sii9022
  * ENGR00137554 GPMI : init the `chip_count` after the identifier has been
    found
  * ENGR00137559 MXC V4L2 overlay:Don't clear FG position after preview
  * ENGR00137558-1 GPMI : add rom_extra_init() hook for ROM
  * ENGR00137558-2 GPMI : remove the imx23-specific code from the common
    file
  * ENGR00137558-3 GPMI : add ->rom_extra_init() for imx23
  * ENGR00137558-4 GPMI : remove the imx23-specific hooks
  * ENGR00137600-1 GPMI : remove the structure physical_geometry{}
  * ENGR00137600-2 GPMI : remove the structure physical_geometry{} for
    imx23
  * ENGR00137600-3 GPMI : remove the structure physical_geometry{} for main
    file
  * ENGR00137600-4 GPMI : remove the structure physical_geometry{} for
    common files
  * ENGR00137517 MXC V4L2 capture:Improve streaming capture
  * ENGR00137557 MXC V4L2 overlay:Fix preview issue on DI1 BG fb
  * ENGR00137543 tve-vga: can not return correctly after suspend/resume
  * ENGR00137546-1 MMA8450: Add mma8450 accelerometer driver
  * ENGR00137546-2 IMX53_LOCO: Enable MMA8450 accelerometer sensor
  * ENGR00137122 MX53_SMD: Add gpio keys, volume up/down.
  * ENGR00137615 imx23 : disable the MTD_UBI_GLUEBI
  * ENGR00137602-1 input: FSL MPR121 capacitive touch button.
  * ENGR00137602-2 MX53_SMD: add mpr121 button in MX53_SMD.
  * ENGR00137602-3 imx5_defconfig: enable mpr121 by default.
  * ENGR00137556-1 add da9053 pmic driver
  * ENGR00137556-2 porting da9053 pmic driver
  * ENGR00137556-3 add da9053 driver to MX53 smd &loco boards
  * ENGR00137501 MX53 SMD/LOCO Enable the AHCI SATA
  * ENGR00137502-1 MX53 SMD Enable Sandisk eMMC DDR mode
  * ENGR00137502-2 SDHCI: Enable Sandisk eMMC DDR mode on SMD
  * ENGR00136007-1 MX53 TO2.0: Add ASRC support
  * ENGR00136007-2 ASRC: change clk and fix one errata
  * ENGR00136007-3 SDMA: add ASRC support
  * ENGR00136007-4 enable ASRC in default config
  * ENGR00137628 MX5: add busfreq platform data
  * ENGR00137718-1 imx23 : add system revision for imx23
  * ENGR00137718-2 imx28 : add system revision for imx28
  * ENGR00137666-1 mx5: remove mxc_srtc_platform_data struct
  * ENGR00137666-2 srtc: remove mxc_srtc_platform_data struct
  * ENGR00137666-3 MX5: Enable SRTC driver in defconfig
  * ENGR00137669-3 MX53_SMD: workaround for UART have problem when DMA
    enable.
  * ENGR00137669-4 config: enable ATH3K BT_RFKILL in default config
  * ENGR00137677 imx53 MSL: add hdmi support for SMD/LOCO platform
  * ENGR00137624 MXC V4L2 capture:Don't enable mclk after resume
  * ENGR00137723 usb-otg: fix otg symbols are undefined problem at non-otg
    config
  * ENGR00137726 config: Fix typo in imx5_defconfig
  * ENGR00137500-1 OV5640 camera: Add driver support
  * ENGR00137500-2 OV5642 camera: Add driver support
  * ENGR00137500-3 MX53 SMD:Support OV5640 camera
  * ENGR00137500-4 MX5 defconfig:Build OV5640/OV5642 camera as module
  * ENGR00137580 - EPDC fb: Endless collision due to bug in collision
    handling
  * ENGR00137638 - EPDC fb: Temperature index wrong during EPDC init
  * ARM: imx: change the way imx-uarts are registered
  * ARM: mx51: dynamically register imx-uart devices
  * ENGR00137669-1 Bluetooth: Support for Atheros AR300x serial chip
  * ENGR00137669-2 rfkill: mx53: ath3k rfkill interface.
  * ENGR00137762-2 usb: change the function name for debounce vbus & id
    value
  * ENGR00137777 Enable MMA8450 accelerator support for i.mx50 evk
  * ENGR00137733 MXC V4L2 overlay:Fill black data to fb before preview
  * ENGR00137783-1 MXC V4L2 capture:Add several ioctrl support
  * ENGR00137783-2 OV3640:Add several internal ioctrl support
  * ENGR00137783-3 OV5640:Add several internal ioctrl support
  * ENGR00137783-4 OV5642:Add several internal ioctrl support
  * ENGR00137783-5 ADV7180:Add one internal ioctrl support
  * ENGR0000137838 SDHCI Some eMMC cards can't work well in our BSP
  * ENGR00137721 SATA AHCI fix the return value in the driver
  * ENGR00137872-1 mx28_msl: move wakeup handle from driver to MSL
  * ENGR00137848 MX50 ePxP: Fix potential deadlock issue
  * ENGR00137489 mx50 rdp: specify the regulator in esdhc2 platform data
  * ENGR00137932 SATA AHCI Built in SATA driver
  * ENGR00137927-1 mx28_msl_usb: re-organize the platform data for device
    and host
  * ENGR00137844 MX53: update MFG defconfig
  * ENGR00137936 MX53_SMD/LOCO Add GPIO keys.
  * ENGR00137946 mx53 smd: add power off support
  * ENGR00137973 MX53_TO2: DVFS core caused system hang
  * ENGR00137867 - EPDC fb: Unable to initialize E-Ink with rotated
    orientation
  * ENGR00137924-1: Added API to read IOMUX settings
  * ENGR00137924-2: MX50EVK: Improve board level suspend mode power.
  * ENGR00137980 spdif: enable spdif_clk src support
  * ENGR00137983 MX53: Update CPU working points
  * ENGR00138032 MX53 TO2: Add DVFS support for 1GHZ
  * ENGR00137958-1 Add da9053 driver for suspend via i2c command
  * ENGR00137873 ipuv3 fb: can not set correct bpp for tve through cmdline
  * ENGR00136874-1 pwrkey: enhance the driver to support key press status
  * ENGR00137958-2 Add mx53 smd&loco suspend via i2c command
  * ENGR00136874-2 mx5x: update the power key platform data
  * ENGR00138037 mx53: use round_rate to set asrc serial clk
  * ENGR00137991-1 MSL mxc edid: add cea ext block parser
  * ENGR00137991-2 mxc edid: add cea ext block parser
  * ENGR00138060 MX53 SMD:Change to use OV3640 defaultly
  * ENGR00137992 MX53 LOCO:Add Seiko WVGA LCD panel support
  * ENGR00138071-1 MX53_SMD: mpr121: adjust key order per hardware design.
  * ENGR00138071-2 input: mpr121: change input type from EV_MSC to EV_KEY
  * ENGR00138050 mx53 smd: enable WiFi power during system boot up
  * ENGR00137979-1 [MX28]add performance monitor driver
  * ENGR00137979-2 [MX50]add performance monitor driver
  * ENGR00137979-3 add performance monitor driver
  * ENGR00138115-1 TVE:Correct TVDAC regulator voltage value
  * ENGR00138115-2 MX53 SMD:Add TVDAC regulator for TVE pdata
  * ENGR00138119 MXC V4L2 capture:Check slave device attached
  * ENGR00138138 Add workaround to fix irq wakeup for mx53 smd &loco
  * ENGR00138130-1 input: Maxi max11801 resistance touchscreen controller
  * ENGR00138130-2 MX53_ARD: add max11801 touch device.
  * ENGR00138213-1 Add da9053 power key to mx53 smd &loco
  * ENGR00138213-2 Add da9053 power key to mx53 smd &loco
  * ENGR00138211 mx5: don't allow to enter low bus if only have 1 WP
  * ENGR00138141 GPU: add a wait loop to check timestamp for yamato
  * ENGR00138222 MX5x SAHARA Do not call clk_disable in IRQ context
  * ENGR00138268 hdmi: change device create method
  * ENGR00138270-1 header file: change ipu_check_buffer_busy func name.
  * ENGR00138270-2 ipuv3: change ipu_check_buffer_busy to
    ipu_check_buffer_ready
  * ENGR00138270-3 ipuv3 fb: refine pan display method
  * ENGR00138201 MX53_SMD: BT: add delay after BT chip reset
  * ENGR00138217 mx53: use arm_podf to switch cpu frequency
  * ENGR00137224 L2Switch: Fix L2Switch port learn not take effect issue.
  * ENGR00138371 usb-otg: some variables should be updated at otg irq
  * ENGR00138065 linux: System hang when running tiger and then moving usb
    mouse
  * ENGR00138425 MX53 LOCO/SMD: Only preset voltage for suspend to mem mode
  * ENGR00119661 MXC IPUv3 FB:Fix arbitary bpp issue
  * ENGR00138477 USB: perfect usb debug file
  * ENGR00138479 Restructure MX53 bus frequecy driver
  * ENGR00138480: mxc_iim can't be open twice
  * ENGR00138333 MX5x In security drivers use IS_ERR to check for clk
    pointer error
  * ENGR00138516: MX5X: Initialize CPU working point correctly for
    DVFS-CORE
  * ENGR00138528 MX53 loco&smd:preset suspend voltage in the latest stage
  * ENGR00138540 mx51: set low bus flag after entering low bus mode
  * ENGR00138532: mxc_iim: let mxc_iim work with dd and echo
  * ENGR00138547: mxc_iim: can't release twice in mxc_iim
  * ENGR00138535 USB: Discharge VBUS after set VBUS lower or unplug from
    HOST
  * ENGR00138165 - EPDC fb: Updates not protected against changes to FB
    data
  * ENGR00138121 Fix system hangs when arecord/aplay continuously
  * ENGR00138560 USB: Disable usb interrupt before host resume
  * ENGR00137418 [MX28]fix aplay has no sound after suspend/resume
  * ENGR00138520 IPUv3:Correct IPU spinlock logic
  * ENGR00138513 - EPDC fb: Auto-waveform selecting wrong waveform mode
  * ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookie
  * imx: fix iomux v3
  * MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)
  * ARM i.MX51: Full iomux support
  * ENGR00138024-1 Add full IOMUX support for MX53 and MX51
  * ENGR00138024-2 Update mx5x board file to use u64-bit iomux
  * ENGR00138697 Fix pad control for power key on mx51-babbage
  * ENGR00138651 - EPDC fb: Rotation updates clipped incorrectly
  * ENGR00138742 - EPDC fb: Driver may run out of markers after a while
  * ENGR00138652 - EPDC fb: Out-of-memory due to alloc/free temp buffers
  * ENGR00138731-1 DVFS-CORE: Add support for more than two CPU working
    points.
  * ENGR00138731-2: MX5X: Update DVFS-CORE to support more than 2 operating
    points.
  * ENGR00138859-1: DVFS: Fix bug in setting ARM-PODF
  * ENGR00138859-2: MX53-Incorrect CPU frequency when exiting LPAPM mode
  * ENGR00138821 - EPDC fb: Panning may cause missed collision
  * ENGR00138820 - EPDC fb: PxP mutex handling may cause race condition
  * ARM: 6379/1: Assume new page cache pages have dirty D-cache
  * ENGR00139076 - EPDC fb: Pan display may drop key updates
  * ENGR00139053-1: DVFS: Remove unused variable from dvfs_core structure
  * ENGR00139053-2: MX50_ARM2:Incorrect num_cpu_wp initialization breaks
    dvfs_core
  * ENGR00138642-1 msl-gpio:fix spin lock recursion problem
  * ENGR00138642-2 usb-device: fix spin lock recursion problem
  * ENGR00138644-1 MSL:change the video mode setting method
  * ENGR00138644-2 header file: change the video mode setting method
  * ENGR00138644-3 ipuv3 fb: change the video mode setting method
  * ENGR00138644-4 TVE: change the video mode setting method
  * ENGR00138644-5 HDMI: change the video mode setting method
  * ENGR00138644-6 imx5_defconfig: change config name for hdmi
  * ENGR00139111: USB GADGET: Fix endpoint disable problems
  * ENGR00139110-1 MX53 SMD/ARD/EVK:MSL change for LDB video mode
  * ENGR00139110-2 LDB:Chang video mode setting method
  * ENGR00139191 [MMC]vendor spec register will be overwrittern
  * ENGR38635466 [mx28]add auart4 rx resource
  * ENGR00139196 MX53 ARD: add VGA support
  * ENGR00137879-1 input: add HannStar p1003 touch screen driver
  * ENGR00137879-2 MX53_SMD: add p1003 touch device to MX53_SMD
  * ENGR00138491 mx51/mx50: enable SD2 power during suspend
  * arm: mxc: move IOMUX_CONFIG_SION definition to iomux-v3.h
  * ENGR00139377 Iomux clean-up, remove unnecessary defines.
  * ENGR00139345 MX51: clock: gpu depends on emi_fast clock
  * ENGR00139354-1 MSL: add common ddc driver support
  * ENGR00139354-2 header file: add common ddc driver support
  * ENGR00139354-3 mxc edid: add common ddc driver support
  * ENGR00139321 ipuv3: add YV12 format support
  * ENGR00139422 mxc edid: fix build break for imx25
  * ENGR00139423 mxc edid: add edid attr sysnode
  * ENGR00139192 - EPDC fb: Refine merging and workaround missed collision
  * ENGR00139380-1 SMD-MSL: add max17085 battery charger support
  * ENGR00139380-2 battery charger: add max17085 battery charger support
  * ENGR00139455 Add support for pad settings in groups
  * ENGR00139054-1: MX50- Simplify DDR frequency change code.
  * ENGR00139054-2: MX50- Simplify DDR frequency change code.
  * ENGR00139460: MX50 - Suspend/Resume fails on ARM2 board.
  * ENGR00139503 MX53: Add IEEE 1588 support for mx53 LOCO and SMD boards
  * ENGR00139119: mxc_iim: add console output for iim value
  * ENGR00139505 battery charger: add battery charger change event for
    max17085
  * ENGR00139643-1 MSL: can not read edid at probe for first power on
  * ENGR00139643-2 header file: can not read edid at probe for first power
    on
  * ENGR00139643-3 mxc edid: can not read edid at probe for first power on
  * ENGR00139635 mxc edid: add edid name sysnode
  * ENGR00138354 spdif: Fix System crashes when playing video with HDMI
  * fbdev: Fix fb_find_nearest_mode refresh comparison
  * ENGR00139755 mxc edid: work around no support interlaced mode
  * ENGR00139383-1 Add ISL29023 light sensor support
  * ENGR00139383-2 MX53 SMD:Support ISL29023 light sensor
  * ENGR00139383-3 MX5 defconfig:Support ISL29023 light sensor
  * ENGR00139866 Config: add USB ACM Modem config for MX53_SMD
  * ENGR00139531: MX5x-All bus-masters must have DDR clock as a dependent
    clock.
  * ENGR00137868 - EPDC fb: Accept unlimited updates for queued scheme
  * ENGR00140036 Set init max poll delay time in mma sensor driver
  * ENGR00140050 GPU: workaround hang with heavy bus loading
  * ENGR00139919 - EPDC fb: Allows merging of 2 updates with markers
  * ENGR00140086 - EPDC fb: Alternate buffer virtual address handled
    incorrectly
  * ENGR00140086-1 - EPDC fb: Alternate buffer virtaul address handled
    incorrectly
  * ENGR00140122 MX53_SMD: p1003: report single pointer.
  * ENGR00140390 MX53_SMD: IOMUX: Fix UART3 iomux or Atheros BT will hang.
  * ENGR00140391 ISL29023:Keep int thresholds in interrupt handler
  * ENGR00140400 MXC V4L2 capture:Add maximum buffer number
  * ENGR00140265 mx53 smd: add support for hardware pin controlled suspend
  * ENGR00139626 MX53: fix can not set to 160M when current CPU works at
    1000M
  * ENGR00140401 SET_BLOCKLEN shouldn't be sent when eanble DDR
  * ENGR00140460 spdif: Fix spdif can't playback at the first bootup
  * ENGR00140543 ISL29023:Add device head file to Kbuild
  * staging: add ath6kl driver for AR6003 chip
  * ENGR00140550-1 [AR6003 WIFI]modifications from cherry-pick
  * ENGR00140550-2 [AR6003 WIFI]remove old wifi driver
  * ENGR00140550-3 [imx5/AR6003]enable staging/ar6003 driver in default
    config
  * ENGR00140550-4 [imx28/AR6003]enable staging/ar6003 driver in default
    config
  * ENGR00140644 mx51 enchance the sd/mmc HW timing compatibility on BBG
  * ENGR00140700 GPU: fix tiger run the second time causing system hang
  * ENGR00140699-1 [mxs spi]support spi slave mode.
  * ENGR00140699-2 [mx28 spi] add a parameter to select spi master/slave
    mode
  * ENGR00140638 - EPDC fb: System may hang if entering suspend while
    updates active
  * ENGR00140668 MX53: increase dram_sdclkx driver strength
  * ENGR00140710-1 usb-device: add more device wakeup modes
  * ENGR00140710-2 usb-device: add more device wakeup modes
  * ENGR00140764 ipuv3 dev: change cache policy to writethrough
  * ENGR00137340 Add headphone detection in imx5x.
  * ENGR00140486-1 MX50 Add SPI NOR Flash on RD3
  * ENGR00140274: SPI_NOR: Add m25p32 spi flash support
  * ENGR00140864-1 OV5640:Support QSXGA(2592x1944) at 7.5fps
  * ENGR00140864-2 OV5642:Support 1080P at 15fps and PAL at 30fps
  * ENGR00140933 MX51 IOMUX fix headphone detect pin iomux.
  * ENGR00140893-1 VPU: remove VPU IRAM config and add iram info to plat
    data.
  * ENGR00140893-2 vpu: Add iram info to vpu platform data for each
    platform
  * ENGR00140893-3 Re-generate imx5_defconfig due to MXC_VPU_IRAM config
    removed
  * ENGR00140971 Add support for LVDS & touchscreen on MX53 ARD RevB brd
  * ENGR00140875: MX51: Added 400MHz working point
  * ENGR00140979: MX53: Update VDDGP voltages
  * ENGR00140950 mfg: fix the bug that ubiformat utility breaks utp
    protocol
  * ENGR00140763 MX53: By default only enable da9053 irq as wakeup source
  * ENGR00141092 usb: fix some tiny bugs for usb
  * ENGR00141109: MX53-SMD: SPI-NOR: Add mxc_m25p80 to imx5_defconfig
  * ENGR00141155-1 ARM mx53_smd: add related regulator for hdmi
  * ENGR00141155-2 sii902x: add related regulator
  * ENGR00141161 ipuv3: add bgr24 fmt support for di
  * ENGR00141152-1 header file: make default display option
  * ENGR00141152-2 imx5X MSL: make default display option
  * ENGR00141152-3 ldb: make default display option
  * ENGR00141152-4 mxc edid: make default display option
  * ENGR00141152-5 sii902x: make default display option
  * ENGR00141152-6 tve: make default display option
  * ENGR00141184: MX53 SMD: spi nor: the expected SPI-NOR partitions are
    not created
  * ENGR00141299: NAND/MXC: Fix the build warning
  * ENGR00141306 MX53 SMD: add Seiko WVGA LCD panel support
  * ENGR00141310 mx5x clock: add emi_fast_clk as tz1's parent for uart dma
  * ENGR00141343 Mx53: reduce vdd_reg power on suspend
  * ENGR00141312 tve: add uevent for tve cable detection
  * ENGR00141393 usb: revert one tiny change
  * ENGR00141363 ARM imx53 clock: change di0 clock default parent to pll3
  * ENGR00141400 GPU: Improve GPU clock gating
  * ENGR00141489 spdif: remove the tx source clock enable in the driver
    probe
  * ENGR00140702-1 BT: backport atheros 2.6.38 AR3001 bt driver
  * ENGR00140702-2 MX5: UART: enable UART3 DMA transfer
  * ENGR00140702-3 mxc_uart: refine driver for stable Bluetooth
  * ENGR00140702-4 BT: enable ath3k bluetooth config in default config.
  * USB: serial/usb_wwan, fix tty NULL dereference
  * ENGR00141652 MX53_SMD: BT: don't reset BT chip during system suspend &
    resume.
  * ENGR00140737-1 - ARM: plat-mxc: Disable child clocks before parent
    clocks
  * ENGR00140737-2 - ARM: imx50: Fix APLL relocking and remove APLL
    auto-disable
  * ENGR00141485 - EPDC fb: Change default update scheme to Queue & Merge
  * ENGR00141478-1 SAHARA: Move header file to include directory
  * ENGR00141478-2 SAHARA: Move header file to include directory
  * ENGR00141717 MX53: reduce ddr drive strength on suspend
  * ENGR00141923 input: max11801: adjust calibration orientation
  * ENGR00122019 SAHARA: Add padding around buffers to prevent cache
    incoherency
  * ENGR00142006: MX50- Fix audio noise issue.
  * ENGR00141918 - EPDC fb: Fix update merging to ensure best waveform is
    applied
  * ENGR00139461-1 mxc alsa soc spdif driver
  * ENGR00139461-2 mxc alsa soc spdif driver
  * ENGR00141554 tve: fix atomic schedule issue in uevent
  * ENGR00142018 MX50: Add PD+3 routine for all DDR types
  * ENGR00142177 MX51_BBG: Fix keymapping in debug board.
  * ENGR00127174-1 SPI : Add DMA mode support MSL related modifications
  * ENGR00127174-2 SPI driver: Add DMA mode support
  * ENGR00142351 mxc_gpu: autogating: add pending flag
  * ENGR00142347-1 input: add basic support for EETI eGalax touch screen
  * ENGR00142347-2 MX53_SMD: add EETI eGalax touch screen support.
  * ENGR00142347-3 input: egalax_ts, add suspend and force single mode
    support.
  * ENGR00142347-4 config: enable eGalax touch screen.
  * ENGR00142487 GPMI : use the platform's partition layout firstly
  * ENGR00142462 SPDIF buffers default to external ram
  * ENGR00142459 - EPDC fb: TCE underrun workaround
  * ENGR00142410 MX50 PXP: Fix PxP operation may time out or hang up
  * ENGR00142631 usb: id is 0 for default mode for mx53 loco board
  * ENGR00141486-1 mx5x: remove build warning message
  * ENGR00141486-2 i.mx drivers: remove building warning message
  * ENGR00141486-3 serial: remove building warning message
  * ENGR00141486-4 backlight: ath6kl: remove build warning message
  * ENGR00142729 SRTC: Add missing delay for writes to LP registers
  * ENGR00142679 SCC2 and SAHARA: changes to support loadable modules
  * ENGR00141235-1 mag3110: Add mag3110 3-Axis magnetometer support.
  * ENGR00141235-2 mx53 smd: Add mag3110 magnetometer driver support
  * ENGR00141235-3 mx5 defconfig: Support mag3110 magnetometer sensor
  * ENGR00142954 - MSL clocks: correct APLL settings to prevent random PxP
    lockups
  * ENGR00142997 - EPDC fb: LUT selection should be lowest possible when
    LUT15 busy
  * ENGR00141964 - EPDC fb: Ambient temperature setting handled incorrectly
  * ENGR00142977 SDHCI Refine the special delay for SMD eMMC
  * ENGR00143019-1 GPU: add mxc_gpu_platform_data structure
  * ENGR00143019-2 GPU: enable MMU
  * ENGR00143019-3 MX5: enable GPU MMU
  * ENGR00143114 mx53 QS: add p1003 and egalax touch screen
  * ENGR00141665 hwmon: mma8451 cleanup/refine code.
  * ENGR00141425-1 MX50: Restruct PMIC framework to accept new PMIC Ripley
  * ENGR00141425-2 MX50 RDP: Adjust MC13892 driver on new framework
  * ENGR00141567 Fix build break for other platforms
  * ENGR00140872 MX50: Add RD3 support
  * ENGR00141508-1 MX50 RD3: Add PMIC Ripley driver
  * ENGR00141508-2 MX50 RD3: Add board-specific file for PMIC Ripley
  * ENGR00141672 MX50 RD3: Add board-specific configuration for M25P32
  * ENGR00141735 MX50 RD3: use platform_device_id to differentiate two
    pmics
  * ENGR00140983-1 - MX50 IOMUX: Add defines to use LCDIF through EPDC pads
  * ENGR00140983-2 - FSL Devices: Add LCD device functions to
    enable/disable pins
  * ENGR00140983-3 - MSL: Support SII902X HDMI on MX50 RD3
  * ENGR00140983-4 - SII902X fb: Support HDMI driven through LCDIF module
  * ENGR00142123-1 MX50: Add PINMUX callback for CLAA WVGA driver on RD3
  * ENGR00142123-2 MX50: Add CLAA WVGA driver support on RD3
  * ENGR00142167 [MX50]MC34708 battery driver
  * ENGR00142258 MX50 RD3: Isolate EIM signals and boot configuration
    signals
  * ENGR00142264 MX50 RD3: Make battery driver built as module
  * ENGR00142097 MX50 RD3: Fix: Enable HDMI will cause reboot failure
  * ENGR00142411-1 [MX50]RD3 change switch mode
  * ENGR00142411-2 [MX50]Fix minor bug of regulator
  * ENGR00142581-1 MX50 RD3: Make SEIKO WVGA panel work on J12
  * ENGR00142581-2 MX50 RD3: Add PINMUX setting callback in wvga driver
  * ENGR00142745 MX50 RD3: Fix missing pmic config in imx5_update_defconfig
  * ENGR00143050-1 PMIC: Generalize the interface for PMIC via I2C
  * ENGR00143050-2 PMIC: Change the device name according to new framework
  * ENGR00142638 pmic mc13xxx: make event thread freezable
  * ENGR00143120 p1003, egalax: enable PRESSURE event
  * ENGR00143176 MX53 SMD: change default camera to ov5642
  * ENGR00143292 Set scr low power bit when spdif not in use
  * ENGR00142683 IPUv3:Increase IDMAC BS for RGBP and DMFC BS
  * ENGR00143309 IPUv3fb:Set default yres_virtual to be 3*yres
  * ENGR00143239-1 MX53: add power off and reset function
  * ENGR00143239-2 MX53: add power off and reset function
  * ENGR00143341-1 ldb: return error if ldb driver is not enabled
  * ENGR00143341-2 tve: return error if tve driver is not enabled
  * ENGR00143341-3 sii902x: return error if the sii902x driver is not
    enabled
  * ENGR00143341-4 mxc edid: return error if the edid driver is not enabled
  * ENGR00143384 Fec: fix get wrong carrier status when ethx down
  * ENGR00143430 mx53 ard: remove DDR operations in suspend and resume
  * ENGR00143435 mfg defconfig: add m25p32 spi nor flash driver into
    defconfig
  * ENGR00143346 mx53 ard: add touch screen support via I2C2
  * ENGR00143324-1 v4l2_capture: add camera rotate function
  * ENGR00143324-2 ov5642: add camera rotate function
  * ENGR00143486 - MSL: MAX17135 init_data incorrectly declared __initdata
  * ENGR00143422: MX50- Fix self-bias for the bandgap refernce.
  * ENGR00143473 MX5X: fix backlight disable after suspend.
  * ENGR00143396-1 Add DA9053 version detection
  * ENGR00143396-2 MX53 SMD: detect DA9053 version
  * ENGR00143575 IPUv3:Align IDMAC BS with DMFC FIFO BS
  * ENGR00141131-1: MX53_ARD: MLB can't support 1024fs data transfer
  * ENGR00141131-2: MX53_ARD: MLB can't support 1024fs data transfer
  * ENGR00143681 GPU: update z430 microcode
  * ENGR00142970 MX53: remove 160M working point
  * ENGR00143799 Add SCC RAM clock to dependency list for SAHARA clock tree
  * ENGR00143648 MX53: Fix iomux config error
  * ENGR00143857 MX53_SMD: egalax_ts: wake up IC before read firmware
    version.
  * ENGR00143296-1 Add mc34708 PMIC support for mx53 Ripley Quick Start
    board.
  * ENGR00143296-2 Add Ripley mc34708 i2c driver support
  * ENGR00144003 mx3: Fix build failure issue due to mc34708 driver
  * ENGR00144219 Fix vpu caused system hang due to clock gated off on mx53
  * ENGR00144088 MX5 clock: Fix ssi_ext1_clk is always on without alsa
    playing
  * ENGR00144287-1 MSL: make hdmi work for both mx53 and mx50
  * ENGR00144287-2 header file: make hdmi work for both mx53 and mx50
  * ENGR00144287-3 hdmi: make hdmi work for both mx53 and mx50
  * ENGR00144316 mx53 Ripley QS: Change PMIC INT GPIO pin and enable SWBST
    for VUSB
  * ENGR00144309 do nothing if the core frequency is not changed
  * ENGR00144104-1 AHCI: Some usb related clocks are always on even without
    USB disk
  * ENGR00144104-2 AHCI: Some usb related clocks are always on even without
    USB disk
  * ENGR00143611-1 mx53_smd: track DA9053 version/USB wakeup issue
  * ENGR00143611-2 DA9053: track DA9053 version/USB wakeup issue
  * ENGR00144395-1 mx5 defconfig: disable SATA hot plug mode
  * ENGR00144395-2 sata: remove additonal iounmap
  * ENGR00144428 mx51BBG: fix segment fault when suspend for no da9053
  * ENGR00144497 Revert MX5 clock: Fix ssi_ext1_clk is always on without
    alsa

 -- Kamal Mostafa <kamal@canonical.com>  Mon, 26 Sep 2011 11:09:09 -0700

linux-charlotte (2.6.35-12.38) lucid; urgency=low

  [ Andrew Bird ]

  * USB: update Huawei K3565 modem blacklists
    - LP: #795249

  [ Kamal Mostafa ]

  * Tracker of 38 upload for charlotte
    - LP: #806091
  * config: enable CONFIG_TUN
    - LP: #809402

 -- Kamal Mostafa <kamal@canonical.com>  Fri, 15 Jul 2011 09:25:53 -0700

linux-charlotte (2.6.35-12.37) lucid; urgency=low

  [ Ike Panhc ]

  * Tracker of 37 upload for charlotte
    - LP: #800117

  [ Upstream Kernel Changes ]

  * USB: option Add blacklist for ZTE K3765-Z (19d2:2002)
    - LP: #802697

 -- Kamal Mostafa <kamal@canonical.com>  Tue, 05 Jul 2011 08:27:07 -0700

linux-charlotte (2.6.35-12.36) lucid; urgency=low

  [ AceLan Kao ]

  * charlotte: add 400MHz DVFS working point
    - LP: #739898

  [ Ike Panhc ]

  * Tracker of 36 upload for charlotte
    - LP: #794816

  [ Upstream Kernel Changes ]

  * ENGR00137317-1 USB MSL: handle non-intent wakeup irq triggered by PHCD
    change
    - LP: #794821
  * ENGR00137872-2 mx5x_msl: move wakeup handle from driver to MSL
    - LP: #794821
  * ENGR00135975 usb: Add protection for resume routine for udc driver
    - LP: #794821
  * ENGR00137649 usb-udc: change mutex_lock to spin_lock_irqsave at pm
    routines
    - LP: #794821
  * ENGR00137080 USB: fix usb device can't work on MX53 board
    - LP: #794821
  * ENGR00137317-2 USB: handle non-intent wakeup irq triggered by PHCD
    change
    - LP: #794821
  * ENGR00137128 USB: Set USBCMD RS bit as soon as receive resume signaling
    - LP: #794821
  * ENGR00137667-1 usb-otg: refine the otg configration
    - LP: #794821
  * ENGR00137667-2 usb-host: hcd needs to be removed if the host's probe is
    error
    - LP: #794821
  * ENGR00137927-2 mx5x_msl_usb: re-organize the platform data for device
    and host
    - LP: #794821
  * ENGR00137927-3 usb-host add vbus ON operation for OTG host driver
    - LP: #794821
  * ENGR00137872-3 usb: move wakeup handle from driver to MSL
    - LP: #794821
  * ENGR00137762-1 usb: debounce vbus and id value for all usb mode
    - LP: #794821

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 21 Jun 2011 16:23:38 +0800

linux-charlotte (2.6.35-11.35) lucid; urgency=low

  [ Ike Panhc ]

  * Tracker of 35 upload for charlotte
    - LP: #793625

  [ Upstream Kernel Changes ]

  * v7.1.20110531.01 driver integration for fix wifi scan failed issue
    - LP: #793800

 -- Kamal Mostafa <kamal@canonical.com>  Tue, 07 Jun 2011 19:42:08 -0700

linux-charlotte (2.6.35-11.34) lucid; urgency=low

  [ Ike Panhc ]

  * Tracker of 34 upload for charlotte
    - LP: #790045

  [ Upstream Kernel Changes ]

  * ENGR00137651 USB: Change usb wakeup task wait for completion
    interruptible
    - LP: #720812

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 03 Jun 2011 10:47:00 +0800

linux-charlotte (2.6.35-11.33) lucid; urgency=low

  [ AceLan Kao ]

  * fsl_devices: adding the losting header file
    - LP: #720812
  * config: enable CONFIG_MAGIC_SYSRQ
  * config: enable CONFIG_MD related options
    - LP: #775493

  [ Ike Panhc ]

  * Tracker of 33 upload for charlotte
    - LP: #787898

  [ Upstream Kernel Changes ]

  * ENGR00134154-2 MSL: add sync between usb resume and usb wakeup thread
    for MX5x
    - LP: #720812
  * ENGR00134154-3 usb: add sync between usb resume and usb wakeup thread
    - LP: #720812
  * ENGR00133702-1 usb host1: Add usb host1 low power and wakeup support
    for mx28
    - LP: #720812
  * ENGR00133702-2 usb host1: Add usb host1 low power and wakeup support
    for mx28
    - LP: #720812

 -- Ike Panhc <ike.pan@canonical.com>  Sun, 29 May 2011 14:14:24 +0800

linux-charlotte (2.6.35-10.32) lucid; urgency=low

  [ AceLan Kao ]

  * config: aligned the USB options
    - LP: #775729

  [ Ike Panhc ]

  * Tracker of 32 upload for charlotte
    - LP: #786550

 -- Ike Panhc <ike.pan@canonical.com>  Wed, 25 May 2011 09:52:18 +0800

linux-charlotte (2.6.35-10.31) lucid; urgency=low

  [ Ike Panhc ]

  * Tracker of 31 upload for charlotte
    - LP: #785507

  [ Upstream Kernel Changes ]

  * USB option driver add PID of Huawei Vodafone K3806
    - LP: #785507
  * USB option driver add PID of Huawei Vodafone K4605
    - LP: #785507

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 20 May 2011 11:30:18 +0800

linux-charlotte (2.6.35-10.30) lucid; urgency=low

  [ AceLan Kao ]

  * rtl8712: WIFI power on sequence follow rtl8712 suggestion
    - LP: #758423

  [ Upstream Kernel Changes ]

  * charlotte: Fix codec waveform cutoff issue
    - LP: #780274

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 12 May 2011 18:47:15 +0800

linux-charlotte (2.6.35-10.29) lucid; urgency=low

  [ Ike Panhc ]

  * Rebased to Ubuntu-2.6.35-28.50 and bump ABI number
    - LP: #768788

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 29 Apr 2011 11:34:11 +0800

linux-charlotte (2.6.35-9.28) lucid; urgency=low

  [ Ike Panhc ]

  * charlotte: Use KERN_DEBUG on two kernel outputs
    - LP: #757770

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 26 Apr 2011 10:45:37 +0800

linux-charlotte (2.6.35-9.27) lucid; urgency=low

  [ AceLan Kao ]

  * config: enable CONFIG_SND_USB
    - LP: #723450
  * rtl871x-ioctl: Reduce debug output
    - LP: #757966
  * config: Enable common USB peripheral device
    - LP: #768113

  [ Upstream Kernel Changes ]

  * pm: Suspend and resume power sequence added
    - LP: #767988
  * rt5632: Modify codec gain for quality
    - LP: #768252

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 22 Apr 2011 13:43:00 +0800

linux-charlotte (2.6.35-9.26) lucid; urgency=low

  [ Jeremy Kerr ]

  * remove executable bits from source files
  * mx5: fix conditional include of iomux-mx51.c
  * rtl871x-ioctl: Reduce debug output
    - LP: #757966

  [ Upstream Kernel Changes ]

  * Remove delay 500ms when WIFI enable pin set 1
    - LP: #758419
  * Adding suspend/resume power sequence
    - LP: #758420
  * WIFI power on sequence follow rtl8712 suggestion
    - LP: #758423
  * WIFI suspend/resume power sequence follow specification
    - LP: #758425
  * v7.1.20110409.01 driver porting
    - LP: #758426
  * USB HUB reset signal
    - LP: #758428

 -- Jeremy Kerr <jeremy.kerr@canonical.com>  Thu, 12 Apr 2011 16:53:35 +0800

linux-charlotte (2.6.35-9.25) lucid; urgency=low

  [ AceLan Kao ]

  * config: enable CONFIG_USB_PEGASUS
  * config: enable CONFIG_CHR_DEV_SG
    - LP: #745254
  * net: wireless: rtl8712: remove annoying debug msg

  [ Upstream Kernel Changes ]

  * Adding battery properties default value
    - LP: #745190
  * Correct current error when charging to full and then change to
    discharing mode
    - LP: #745192
  * Checking if ethernet mac address valid. If not, give a default address
    - LP: #745196

 -- Ike Panhc <ike.pan@canonical.com>  Wed, 30 Mar 2011 17:41:55 +0800

linux-charlotte (2.6.35-9.24) lucid; urgency=low

  [ AceLan Kao ]

  * charlotte: catch up with mx51_babbage_pmic_mc13892.c
    - LP: #743772

  [ Alex Chiang ]

  * USB: option: add huawei k3770
    - LP: #719121

  [ Upstream Kernel Changes ]

  * Adding AC power properties and fix charging full information error
    - LP: #743772
  * Fix audio quality spec. can't meet issue
    - LP: #743772
  * Turn on VVIDEO to 2.775 voltages
    - LP: #743772
  * Modify VCOIN to 3.1v for RTC charging power
    - LP: #743772
  * Adding battery-in detect function
    - LP: #743772
  * Adding power good signal to battery device
    - LP: #743772
  * Adding battery-in gpio pin define to bq20z75 i2c device
    - LP: #743772
  * Modify Status only support Full, Charging, Discharging
    - LP: #743772
  * Fix fully charging info. , current unit, temperature error
    - LP: #743772
  * Adding delay to audio codec power on sequence
    - LP: #743772
  * Apply UVC driver patch
    - LP: #743772
  * Disable 3G USB-HS port
    - LP: #743772
  * v7.1.20110321 version integration
    - LP: #743772

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 29 Mar 2011 14:12:21 +0800

linux-charlotte (2.6.35-9.23) lucid; urgency=low

  [ AceLan Kao ]

  * rt8712: fixed the init failed problem
    - LP: #738548
  * config: disabled option CONFIG_FTRACE_STARTUP_TEST
  * config: enable all perf related options
  * config: enable CONFIG_SQUASHFS
    - LP: #739929

  [ Upstream Kernel Changes ]

  * Disable 3G USB-HS port

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 22 Mar 2011 16:33:23 +0800

linux-charlotte (2.6.35-8.22) lucid; urgency=low

  [ Alex Chiang ]

  * rtl8712: translate_scan should not be marked inline
    - LP: #736658

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 18 Mar 2011 14:38:22 +0800

linux-charlotte (2.6.35-8.21) lucid; urgency=low

  [ AceLan Kao ]

  * config: enable function profiler and startup test
    - LP: #735866

  [ Alex Chiang ]

  * ipu: force mmap to use cacheable memory
    - LP: #735931

  [ Ike Panhc ]

  * (buildenv) Build udebs
    - LP: #735853
  * (buildenv) Avoid renaming dbgsym packages
    - LP: #735854

 -- Ike Panhc <ike.pan@canonical.com>  Wed, 16 Mar 2011 17:10:50 +0800

linux-charlotte (2.6.35-7.20) lucid; urgency=low

  [ AceLan Kao ]

  * config: enable profiling
    - LP: #733034
  * mxc: dvfs: remove annoying debug message
    - LP: #730756
  * charlotte: reset the audio soc related pins when boot up
    - LP: #721567

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 15 Mar 2011 16:13:49 +0800

linux-charlotte (2.6.35-7.19) lucid; urgency=low

  [ AceLan Kao ]

  * charlotte: catch up with the modification on babbage
    - LP: #727583, #727584

  [ Upstream Kernel Changes ]

  * charlotte: Fix Headphone detection fail in initial insert condition
    - LP: #727581
  * charlotte: Power management turn on/off related power
    - LP: #727582
  * charlotte: Backlight setting value follow HW spec.
    - LP: #727583
  * charlotte: LCD Power On sequence initial
    - LP: #727584

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 04 Mar 2011 12:46:42 +0800

linux-charlotte (2.6.35-7.18) lucid; urgency=low

  [ AceLan Kao ]

  * charlotte: hid: hid-input: mapping brightness function keys
    - LP: #708694

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 24 Feb 2011 15:52:31 +0800

linux-charlotte (2.6.35-7.17) lucid; urgency=low

  [ AceLan Kao ]

  * charlotte: catch up with the modification on babbage
    - LP: #721069

  [ Upstream Kernel Changes ]

  * charlotte: Modify I2C clock speed to 50KHZ
  * charlotte: Adding WIFI device power on delay to 500ms

 -- Ike Panhc <ike.pan@canonical.com>  Fri, 18 Feb 2011 18:01:41 +0800

linux-charlotte (2.6.35-7.16) lucid; urgency=low

  [ 3rd Party Engineer Changes ]

  * RTL8712 v7.1.20110216 driver integration
    - LP: #720539
  * Remove private version control
    - LP: #720534

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 17 Feb 2011 15:47:17 +0800

linux-charlotte (2.6.35-7.15) lucid; urgency=low

  [ AceLan Kao ]

  * (config) Enable all PPP options and function tracer
    - LP: #715537

  [ 3rd Party Engineer Changes]

  * Fix can't detect battery present issue
  * Configure backlight level from 0 to 7

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 10 Feb 2011 15:56:11 +0800

linux-charlotte (2.6.35-6.14) lucid; urgency=low

  * Bump upload number to work-around FTBFS for .13{build1,}

 -- Jeremy Kerr <jeremy.kerr@canonical.com>  Mon, 07 Feb 2011 12:02:38 +0800

linux-charlotte (2.6.35-6.13) lucid; urgency=low

  [ Upstream Kernel Changes ]

  * ARM: 6328/1: Build with -fno-dwarf2-cfi-asm
    - LP: #713358

 -- Jeremy Kerr <jeremy.kerr@canonical.com>  Sat, 05 Feb 2011 18:53:34 +0800

linux-charlotte (2.6.35-6.12) lucid; urgency=low

  [ Ike Panhc ]

  * (header) add header files in drivers/imx/security
    - LP: #695224

  [ Upstream Kernel Changes ]

  * Modify the wifi 3v3 enable to high for rev. B
  * Power indicated LED setting
  * Modify the wifi 3v3 enable to high for rev. B
  * for Audio testing spec. modification
  * RTL8712 v7.1.20110118 driver integration and modify
    ioctl/rtl871x_ioctl_linux.c for AP scan issue
  * 0.3.0 release
  * Fix power key event issue
  * Adding MTP testing mode
  * 0.3.1 release
  * [iMX51 L2.6.35_10.11.01][VERSION] 0.3.0 release

 -- Jeremy Kerr <jeremy.kerr@canonical.com>  Mon, 31 Jan 2011 15:32:20 +0800

linux-charlotte (2.6.35-6.11) lucid; urgency=low

  [ AceLan Kao ]

  * (config) Enable CONFIG_MXC_SAHARA
    - LP: #695224

 -- Ike Panhc <ike.pan@canonical.com>  Thu, 27 Jan 2011 11:10:01 +0800

linux-charlotte (2.6.35-6.10) lucid; urgency=low

  [ AceLan Kao ]

  * script: change "debian.master" to "debian.charlotte"
  * charlotte: add charlotte board files
  * net: wireless: rtl8712s: enable some options in the Kconfig
  * charlotte: catch up with the modification on babbage
  * net: wireless: rtl8712s: add the losing setting
  * sound: rt5632: remove the annoying debug messages

  [ Ike Panhc ]

  * ehci: fixing undeclared define
  * mxcfb: Fixing missing symbol

  [ 3rd Party Engineer Changes ]

  * Configuration file upload
  * LCD, USB, UART Enable
  * Ericsson 3G dongle module enable
  * Realtek RT5632 audio driver porting
  * Enable Realtek RT5632 device driver
  * TI Bq20z75 battery device added
  * TI Bq20z75 battery driver porting
  * Enable TI Bq20z75 battery driver
  * Modify SDIO read CIS info. for rtl8712 wifi driver
  * Configure the RTL8712 wifi device related gpio for power enable and
    fake interrupt for mmc host driver
  * RTL8712 v7.1.1246.20101224 driver porting
  * Enable related config setting
  * Remove unused devices data
  * Modify the codec gain for dmic noise and vol maximum
  * ON9 composite key events driver porting
  * Adding ON9 composite keys device
  * Enable ON9 composite key events driver

  [ Upstream Kernel Changes ]

  * ENGR00068619 JFFS2 community fix with not use OOB
  * ENGR00069937 Community patch for Fix mount error in case of MLC flash
  * Enable partial low interrupt latency mode for ARM1136
  * tsc2007: fail registration on i2c error
  * ENGR00112200 Add cryptodev device
  * ENGR00114911 make video buffer cacheable to improve video performance
  * cache-l2x0: add enable/disable functions
  * smsc911x: Add phy suspend and resume
  * soc: add wm8580 spi support
  * nand: export symbols needed for stmp3xxx nand nand: increase max nand
    page and oob sizes
  * nand: add more nand devices
  * enc28j60: enhancements for stmp3xxx boards
  * gadget: gadgetfs changes for MTP support
  * usb: add ehci otg support
  * usb: imx usb buffers in iram work-around
  * usb: Add arc ehci driver to ehci core driver
  * ENGR00117742-2 add usb support for mx28
  * ENGR00121497-1 MX28 USB 100mA current draw
  * ENGR00118363 Fix SATA drive failure on Ubuntu 9.10
    - LP: #431963
  * gadget: add stmp uut support to file storage
  * Allow PHYS_OFFSET to be runtime determined
  * ENGR00121762-2: arm: always get phys_offset from stack pointer for MX5
  * ENGR00117843 Missing i.MX headers for kernel headers_install
  * ENGR00118016-2 wm8350: update to 2.6.31
  * ENGR00118016-3 wm8580: update to 2.6.31
  * ENGR00115003 [mx233_BSP] Cannot run fdisk on FTL over an UBI volume.
  * ENGR00122206 MX53-EVK pwm-backlight: PWM backlight enhancement
  * ENGR00122691-1 Add atheros driver ath6kl
  * imx: change timer clock to perclk
  * ENGR00121913 Add sched_clock support to i.mx platform
  * w1: imx: add byte transfer and interrupt support
  * ENGR00126692-1: MX5X: Upgrade kernel to 2.6.35
  * ENGR00126692-2: MX5X: Upgrade kernel to 2.6.35
  * ENGR00126692-3: Upgrade kernel to 2.6.35
  * ENGR00126692-4: Upgrade kernel to 2.6.35
  * ENGR00126692-5: Upgrade kernel to 2.6.35
  * ENGR00125052-1 Common codes changes when enable the eMMC44 DDR
  * fec: use interrupt for MDIO completion indication
    - LP: #457878, #546649
  * ENGR00127171-1 MX23\MX28: Copy 2.6.31 MSL
  * ENGR00127171-2 MX23/MX28: Fix MSL build error at 2.6.35
  * ENGR00127171-3 DMA: Fix DMA build error.
  * ENGR00127171-4 Random: Export add_interrupt_randomness at random.c
  * ENGR00127171-5 Kernel Upgrade: Fix all drivers build error for
    mx23/mx28
  * ENGR00127230 MX5: add mxc_arch_reset_init calling
  * ENGR00127264 mxc: exclude irq when using TZIC
  * ENGR00125326 MX28 ALSA: Can't play streams with sample rate 8k to 22k
  * ENGR00127270 ALSA: Fix 35kernel upgrade cause DMA request fail
  * ENGR00127274 mx5: use upstream i2c driver i2c-imx.c
  * ENGR00127265-1 MX3X: Upgrade kernel to 2.6.35
  * ENGR00127265-2 MX3X: Upgrade kernel to 2.6.35
  * ENGR00127265-3 MX3X: Upgrade kernel to 2.6.35
  * ENGR00127265-4 hmp4e: fix build error
  * ENGR00127265-5 NAND: fix build warning
  * ENGR00127265-6 sdhc: Correct error check for clk get failed
  * ENGR00131832-1 MX25: Upgrade kernel to 2.6.35
  * ENGR00131832-2 MX25: Upgrade kernel to 2.6.35
  * ENGR00127218-1 GPU: add gpu code
  * ENGR00127218-2 mx5: gpu clock: use only con_id to lookup clock
  * ENGR00126208 babbage: put i2c2_sda on key col5
  * ENGR00131389-1 MX5: enable STGL5000 audio codec
  * ENGR00131389-2 switch ssi to fsl ssi driver
  * ENGR00131475 imx5 MSL-CLK: set correct clock lookup item for csi and di
  * ENGR00125736 MX53 PMIC: Turn on the vvideo power supply by default
  * ENGR00131479-1 CS42888: Playback and record support on 35kernel
  * ENGR00131479-2 MX53: Enable CS42888 by default
  * ENGR00125682-1: MX50: Reduce power consumption in STOP mode.
  * ENGR00125682-2: MX50: Fix copyright and formatting in suspend code.
  * ENGR00125693-1 MX53:Set gpo regulator to camera platform data
  * ENGR00125693-2 OV3640:Set gpo regulator's voltage to be 2.8V
  * ENGR00125752 MX50: Change display_axi clock parent to PFD
  * ENGR00125769 MX50: Fix a bug in WAIT macro
  * ENGR00125779 - EPDC fb module load/unload
  * ENGR00125782 - EPDC AXI clk should be disabled before exiting clk init
  * ENGR00125771 usb:should open usb related clock at usb wakeup enable
    mode
  * ENGR00125731-1 mxc esdhc: add two DLL control flags in platform_data
  * ENGR00125731-2 esdhc: add dll override delay line support
  * ENGR00125823-1 mxc esdhc: add a clock always on flag in plat_data
  * ENGR00125823-2 esdhc: add a interface to let clock always on
  * ENGR00125823-3 mx35 esdhc: set clock always on according to
    requirements
  * ENGR00125772 mx50 esdhc: add DDR support
  * ENGR00125856-1 MX53 eSDHC iomux updates when iomux V3 is used
  * ENGR00125856-2 MX51 eSDHC iomux updates when iomux V3 is used
  * ENGR00125874 mx50 esdhc: fix the issue that SD2 can not detect card
    remove
  * ENGR00125833 IMX51_BBG USB:need to reset hub when use iomux-v3
  * ENGR00125800 UIO: clean uioinfo when uninstall uio driver
  * ENGR00125760-1 FEC: add mac field at platform data
  * ENGR00125760-2 MX28: read mac address from fuse
  * ENGR00125760-3 FEC: get mac address from platform data
  * ENGR00125843 usb: Add clock disable to uninit function for mx23/mx28
  * ENGR00125842 usb: Enable otg function at mx28 defconfig
  * ENGR00125849 RTC: enable wakeup source node in sys directory
  * ENGR00125688 TVE:Keep var screeninfo when reconfigure TVE fb
  * ENGR00125855 MX50: APBH DMA mach support
  * ENGR00125860-1 MX50:Add GPMI-RAW-NAND mach support
  * ENGR00125860-2 GPMI:Add RAW NAND driver support
  * ENGR00125860-3 GPMI:Add RAW NAND driver support
  * ENGR00125728-1: DVFS-CORE: Replace IOADDRESS with ioremap.
  * ENGR00125728-2: MX50 - Add DVFS-CORE support.
  * ENGR00125986 FEC:Fix kernel oops for mac address set up
  * USB: fix cdc-acm regression in open
  * ENGR00126057-1 Add RNGB support
  * ENGR00126057-2 MX50 Add RNGB support
  * ENGR00126089 RNG driver defines suspend resume even when CONFIG_PM not
    set
  * ENGR000123347 CAN: Fix crash when transfer 8Byte follow 7Byte
  * ENGR00126075 mx28: gating emi clk and pll for suspend mode
  * ENGR00126061 - EPDC fb: Linux logo should appear when console enabled
  * ENGR00126059-1 - MSL change for EPDC: Add pin enable/disable funcs
  * ENGR00126059-2 - EPDC fb: EPDC pins driven low when not in use
  * ENGR00126059-3 EPDC: Add mxc_epdc_fb_platform_data structure
  * ENGR00123707 MX28: make PxP V4L buffer allocated from DMA_ZONE
  * ENGR00125957-1 mx53-MSL: add sii9022 hdmi support
  * ENGR00125957-2 hdmi: add Sii9022 hdmi driver support
  * ENGR00125957-3 mx5 config: add Sii9022 hdmi driver support
  * ENGR00125796 MX5x: Boot stop at "Starting kernel ..."
  * ENGR00126155 FEC:Set RMII mode corretly after FEC reset
  * ENGR00126158 GPMI: Fix error handling when no NAND found
  * ENGR00126161 MX28:Fix section mismatch warning
  * ENGR00126278 NAND:nfc_clk count not zero after multi-cs NAND scan
  * ENGR00126255 mx50 esdhc: fix the write protect unwork issue
  * ENGR00125411 eMMC: Boot Partition switch func used in MFG tool
  * ENGR00126228 eMMC: Configure boot_partition_enable
  * ENGR00126156 ipuv3: check own clk count only when around clk rate
  * ENGR00126343 v4l2 output: jitters come out when show frame too quick
  * ENGR00126330 iMX23: Fix os timer slower 3%
  * ENGR00126349-1 Fix unable to alloc large DMA buffer issue
  * ENGR00126349-2 Change gfp flag in dma_alloc_coherent in common codes
  * ENGR00126363 USB:Fix dead loop when cat iomem
  * ENGR00126361 DCP driver enable with clock gating
  * ENGR00126213 - EPDC fb: Add ioctl to control powerdown delay
  * ENGR00126327-1 - MSL: Add command line parsing of MAX17135 params
  * ENGR00126327-2 - Max17135 EPD PMIC: Support Pass 2 and VCOM setting
  * ENGR00126451 NAND:Set 4-bit ECC correctly on MX51
  * ENGR00126331 MX28 ALSA: fix 11Khz and 22KHz stream playback issue
  * ENGR00126325 - EPDC fb: Support GPU by aligning framebuffer on 4K
    boundary
  * ENGR00125875-1 mx28: reduce suspend mode power consumption
  * ENGR00125875-2 led: add suspend/resume for LED driver
  * ENGR00126576-1 MX28: read mac address from fuse
  * ENGR00126565-1 MX50: add z160 version to platform_data of gpu_device
  * ENGR00126584 usb gadget driver: Clarify some usb handling routines
  * ENGR00126260-1 - MSL change to define E Ink panels in platform code
  * ENGR00126260-2 - EPDC fb: Support 9.7" panel
  * ENGR00126260-3 - firmware: add 9.7" e-ink panel waveform
  * ENGR00126260-4 - Add epdc_fb_mode data structure
  * ENGR00126619 MX28: Fix compile error when CONFIG_FEC removed
  * ENGR00126606 MX53 EVK:Set DISP0 DE signal drive strength high
  * ENGR00126739 - EPDC fb: driver crashes when no panel selected via
    command line.
  * ENGR00126618 V4L2 capture:Stream mode fails with all IPU channels off
  * ENGR00126716 usb-otg: fix using host structure before init it
  * ENGR00126711 mx28:fix wakeup warning message
  * ENGR00126307 mx53: implement low bus frequency mode
  * ENGR00126721-1 OCOTP: add the ocotp driver
  * ENGR00126721-2 MX23/28/50: add platform data for the ocotp device
  * ENGR00126721-3 MX23\MX28\MX50: Built-in the OCOTP driver in
    update_defconfig
  * ENGR00126721-4 OCOTP: add the Kconfig and Makefile
  * ENGR00126800 esdhc: fix sdio interrupt may be lost issue
  * ENGR00126801 esdhc: remove dump registers during probe time
  * ENGR00126698 - EPDC fb: Pan API should not trigger full screen update
  * ENGR00126795 MX28: Update cpufreq table according to CZ data
  * ENGR00125784 pxp: turn off PxP clock when PxP is inactive
  * ENGR00126867 mx53: add clk gate for usb_phy2_clk
  * ENGR00126882 mx28:increase suspend vddio voltage
  * ENGR00126935: MX50: Fix Clock Dependencies
  * ENGR00126961 I2C: Fix i2c will be fail after miss ack
  * ENGR00126313-1 MX50: Add platform data for V4L2 device
  * ENGR00126313-2 epxp: Add ePxP V4L2 output driver
  * ENGR00127032 pxp: make PxP rotation workable both with epdc and v4l2
  * ENGR00126939 - EPDC fb: Screen shows garbage under certain update
    conditions.
  * ENGR00126863: MX50: Add LPAPM support
  * ENGR00127069 EPDC: Increase FB memory size for X-accel
  * ENGR00127147: MX50: Add support for Automatic Low Power Mode on DDR
  * ENGR00127114 MXS DMA: Add xfer_count to struct mxs_dma_info
  * ENGR00117738 MX28: Support eMMC44 and DDR mode
  * ENGR00127105 DMA:remove mutex when enable/disable DMA channel
  * ENGR00126873 mx50: fix esdhc clock setting issue
  * ENGR00127343 - EPDC fb: wait for powerdown value handled incorrectly
  * ENGR00127275 mx53: add clock depentent
  * ENGR00131397 DMA:fix oops when cat /proc/dma-engine
  * ENGR00127383 usb: enable usb remote wake up for all ports
  * ENGR00131401 ETHERNET:fix the logic error in TX
  * ENGR00127009 MX23 ALSA: Resolve the occasional DMA stuck when recording
  * ENGR00127332 ipuv3: change the disalbe dp-dc timming
  * ENGR00127358 ipuv3: make display data signal negative during blanking
    period
  * ENGR00131456 mfg-tool: Add get cpu id ioctl at utp driver
  * ENGR00131459 MX53: fix system suspend issue
  * ENGR00131501 fec: Fix fec_probe crash
  * ENGR00131515 MX50 DCP driver enable with clock gating
  * ENGR00131516 mx50: fix duplicate registeration of dcp_device
  * ENGR00131489-1 MX5: add arch_idle support
  * ENGR00131489-2 MX3: add arch_idle support
  * ENGR00131470 Fix MX53 SATA failed bug after upgrade to 2.6.35 kernel
  * net: preserve ifreq parameter when calling generic phy_mii_ioctl().
  * net/fec: restore interrupt mask after software-reset in fec_stop()
  * ENGR00131417 ipuv3: change FG position setting code
  * ENGR00131593 Fix Build Error cause by usb otg
  * ENGR00131639 opl: Add OPL driver to 2.6.35 kernel
  * ENGR00131570 SRTC Driver enable for kernel 2.6.35
  * ENGR00131650 SCC2 and SAHARA drivers upgrade to 2.6.35
  * ENGR00131707-1 mx5: upgrade mc13892 regulator driver to 2.6.35
  * ENGR00131707-2 upgrade mc13892 regulator driver to 2.6.35
  * ENGR00131660 ipuv3: left stripe output column should be set to zero
  * ENGR00131709 MX5 clock:Fix the wrong way to register IIM/LDB clocks
  * ENGR00131710 MX53 EVK:Get SSI EXT1 clock correctly for CSI MCLK
  * ENGR00131704 MXC FB:Refine initialization for SII9022 transmitter
  * ENGR00131694-1 MX50 RDP Kernel upgrade to 2.6.35
  * ENGR00131694-2 MX50 RDP Kernel upgrade to 2.6.35
  * ENGR00131788 MX50: add support uncompress putc
  * ENGR00131711-1 MX5: Set esai clock con_id
  * ENGR00131711-2 MXC: Add mxc_audio_codec_platform_data structrue
  * ENGR00131711-3 ESAI: Output the extal clock directly
  * ENGR00131711-4 CS42888: Driver enhancement
  * ENGR00131711-5 MX53: Define cs42888 codec data
  * ENGR00131789-1 MX50 RD:Support Seiko WVGA LCD panel
  * ENGR00131789-2 MXC FB:Support Seiko WVGA LCD panel driver
  * ENGR00127350 ELCDIF FB: Pan display realization improvement
  * ENGR00131830 MX50 RDP Add DCP and RNG devices
  * ENGR00131786-1 Import mach-type file
  * ENGR00131786-2 MX53 ARD: Add MSL support
  * ENGR00131874-1 - MAX17135 updates for kernel 2.6.35 upgrade
  * ENGR00131874-2 - MSL: Update EPDC for kernel 2.6.35
  * ENGR00131874-3 - EPDC fb: updates for kernel 2.6.35
  * ENGR00131874-4 - EPDC 2.6.35 kernel upgrade - hang in PxP during
    transfer setup
  * ENGR00126807 Fix Lan9217 network failure issue
  * ENGR00131841 MX53 ARD: Add MAX7310 support
  * ENGR00131466-1 mxs spi: add version 4.x support
  * ENGR00131466-2 mxs spi: fix incorrect way to handle plat_data of spi
    device
  * ENGR00131466-3 mxs spi: add clk member into plat_data
  * ENGR00131466-4 mxs spi: dynamically check which clock to use
  * ENGR00131466-5 mx23: set clock in plat_data for spi device
  * ENGR00131466-6 mx28: add spi support
  * ENGR00131466-7 mx28: add spi support in defconfig
  * ENGR00131466-8 mxs spi: calculate the actual_length transferred.
  * ENGR00131469-1 mx28: add spi Norflash support
  * ENGR00131469-2 mx28: add m25p80 spi nor driver support in defconfig
  * ENGR00131893 gpmi: add 224 byte oob support
  * ENGR00131909 OCOTP: fix compile error
  * ENGR00131912-1 MX5x: Re-enable the UART dma flag
  * ENGR00131912-2 MX51: Enable UART2 pin settings for Babbage
  * ENGR00131929 mxs spi: fix mx23 compiling failed issue
  * ENGR00131923 MX3: Fix compile error OTG_BASE_ADDR
  * ENGR00131911 fix mc13892 battery probe failure on 2.6.35 kernel
  * ENGR00131906-1 split w1_ds2438 driver as two drivers
  * ENGR00131906-2 MX51: enable ds2438_battery module
  * ENGR00131942 mfg-firmware: add mfg firmware defconfig
  * ENGR00131943 MX50: register gpu2d_clk with only connection ID
  * ENGR00131930-1 MX53: close clocks when boot
  * ENGR00131930-2 MX51: delete clock-mx51.c
  * ENGR00131944 Fix imx-test build failure issue on mx25
  * ENGR00131968 esdhc: fix esdhc gets CRC errors when AHB is 24Mhz
  * ENGR00125983 esdhc: fix the issue that the clock is enabled one more
    time
  * ENGR00131969 MX50 upgrade ePxP DMA engine driver to 2.6.35
  * ENGR00131991 MX50 Register V4L2 device
  * ENGR00132057 MX50: Add DVFS-CORE support to MX50 EVK board.
  * ENGR00131616-1 usb: restructure lower power mode and wakeup function
  * ENGR00131616-2 usb: restructure lower power mode and wakeup function
  * ENGR00131616-3 usb: restructure lower power mode and wakeup function
  * ENGR00131616-4 defconfig: enable otg mode and real-time PM
  * ENGR00131404 MXS DMA: Fix occasional system panic when playback finish
  * ENGR00131984 MXS ALSA: No audio output after repeatedly pause/playing
    with gplay
  * ENGR00132134 MX25 Upgrade security drivers to 2.6.35 kernel
  * ENGR00132066-1: X-accel hangs on startup using 2.6.35 kernel
  * ENGR00132066-2: X-accel hangs on startup using 2.6.35 kernel
  * ENGR00132147 mx23/mx28/mx25: fix build error
  * ENGR00132011-1 - MSL: Update for kernel 2.6.35 for EPDC
  * ENGR00132011-2 - MAX17135: Update for kernel 2.6.35
  * ENGR00131965-1 CAN: Extend the flexcan_platform_data structure
  * ENGR00131965-2 CAN: Use root clock for CAN to caculate bitrate
  * ENGR00131973 MX53 EVK: Use lp_apm to feed CAN
  * ENGR00132173 MX28: Optimize suspend current to 9mA
  * ENGR00132142: Add code to print system clocks information for 35
    kernel.
  * ENGR00132151 MX50-EVK: Fix Suspend/Resume.
  * ENGR00126814 MX5: Reboot fails when dvfs-core is enabled.
  * ENGR00132249 USB:Fix dead loop when cat iomem
  * ENGR00132250 - MAX17135: dynamically detect polarity of PWRGOOD signal
  * ENGR00132100 invert headphone detect logic level
  * ENGR00131573 SRTC Enable time set notification test
  * ENGR00132139 MX50: Set DDR to 24MHz in LPAPM mode
  * ENGR00132073-1 usb: wakeup capability should be controlled by user
  * ENGR00132073-2 usb: wakeup capability should be controlled by user
  * ENGR00132411 sgtl5000 vdda is on regulator sw4
  * ENGR00132377 I.MX53 USB: enable usb host2 on imx53 ard board
  * ENGR00132417 IMX53 USB fix build error for 53 ard board
  * ENGR00132418-1 I.MX USB ID debounce only needed when wakeup event is
    present
  * ENGR00132418-2 I.MX USB ID debounce only needed when wakeup event is
    present
  * ENGR00132389 imx53 MSL:fix hdmi chip i2c detect fail issue
  * ENGR00132184-1 MX50: Port GPMI NAND driver to 2.6.35
  * ENGR00132184-2 MX50: Port GPMI NAND driver to 2.6.35
  * ENGR00132184-3 MX50: register dma_apbh_device and platform data
  * ENGR00125652 - EPDC fb: Fix for bug in handling alternate buffer size
  * ENGR00132113 v4l2 output: fix DQBUF fail after fb blank operation
  * ENGR00132446 MX53 IOMUX:Change the pad setting of DI0_PIN15
  * ENGR00132430-1 MX53: change max frequency of clocks
  * ENGR00132430-2 mxc nand: add "ignore bad block" support
  * ENGR00132430-3 add MT29F16G08ABACA NAND flash support
  * ENGR00131982 Serial Core: Fix wrong baud rate after resume
  * ENGR00132500 MX53 ARD: enable UART log in uncompress phase
  * ENGR00132491-1 ath6kl upgrade: change Kconfig
  * ENGR00132491-2 ath6kl upgrade: add missed semaphore.h headfile
  * ENGR00132491-3 ath6kl upgrade: enable WEXT implicitely
  * ENGR00132491-4 mx28/mx5: add ath6kl driver as module in defconfig
  * ENGR00132477-1 IMX USB:fix some wakeup releated issues
  * ENGR00132477-2 IMX USB:fix some wakeup releated issues
  * ENGR00132477-3 IMX USB:fix some wakeup releated issues
  * ENGR00132388 NAND: Add H27U8G8T2B NAND device support
  * ENGR00132551 NAND: Adjust the boot partition size for MX53
  * ENGR00132486 GPU: Upgrade to Rel 1.1
  * ENGR00132489 GPU: make g12 context id unique
  * ENGR00132459-1 MXC: Add platform_data structure for PWM
  * ENGR00132459-2 PWM: Add PWMO signal invertion option
  * ENGR00132459-3 MX5: Support 2 PWM based backlights
  * ENGR00132553-1 Power: enable power on/off key as suspend/resume key
  * ENGR00132553-2 Power: enable power on/off key as suspend/resume key
  * ENGR00131925-1 MX5 ssi: Add SSI3 support
  * ENGR00131925-2 ssi, sound: Add SSI3 support
  * ENGR00132594 I.MX USB: the udc isr can't process all normal event
  * ENGR00132580 allow prediv by 1 for ext1 clk
  * ENGR00126942 - EPDC fb: Allow flexible specification of X acceleration
    memory
  * ENGR00132334 - EPDC fb: Report PSEUDOCOLOR when framebuffer set to
    grayscale
  * ENGR00132582 MX50: Add keypad for RD board
  * ENGR00132615-1 esdhc: auto switch clock to 20Mhz when AHB is 24Mhz
  * ENGR00132615-2 mx50: delete AHB_HIGH_SET_POINT flag of esdhc clock
  * ENGR00132169 MX28 ALSA: arecord from LINE IN has no sound
  * ENGR00132653 MLB: add regulator check
  * ENGR00131580-1 MX53: Add IEEE1588 hardware-assisted device definition
  * ENGR00131580-2 PTP: Support IEEE 1588 interface functionality for MX5
  * ENGR00132639-1 Power: mxc_pwerkey break mx25 kernel build
  * ENGR00132639-2 Power: mxc_pwerkey break mx25 kernel build
  * ENGR00132656 MX53 ARD: add MFG support
  * ENGR00132634: MX50: Reduce STOP mode power consumption
  * ENGR00132525-1 sgtl5000: audio clock gating
  * ENGR00132525-2 sgtl5000: audio clock gating
  * ENGR00132525-3 sgtl5000: audio clock gating
  * ENGR00126326-1 - MSL: Add support for MAX17135 temperature sensor
    driver
  * ENGR00126326-2 - MAX17135: Add support for temperature sensor
    monitoring
  * ENGR00132674: MX50: Update DDR frequency change code to use new
    scripts.
  * ENGR00124788-1 Add Linear PMIC support
  * ENGR00124788-2 MX53 ARD: Add Linear PMIC support
  * ENGR00132607 MX50: Fix ePxP crash issue
  * ENGR00132563 mx50: enable battery charger on mx50 rdp
  * ENGR00132608 I.MX USB:crashed with cable unpluged during data transfer
  * ENGR00132532 mxs-mmc: change serial clock polarity
  * ENGR00132536 usb-host: Clock should be opened before calling
    ehci_shutdown
  * ENGR00131932-1 MX51, MX53, sdma: Upgrade SDMA scripts to v1.1.0 version
  * ENGR00131932-2 ssi, sound: Upgrade SDMA scripts to v1.1.0 version
  * ENGR00132761 MX51: correct the debug early uart's clock
  * ENGR00132649 SAHARA test causes ext3 file system crash
  * ENGR00132153 sgtl5000: do not enforce symmetry if rate is unknown
  * ENGR00132493 RAMDISK: doing write barrier will return -EIO
  * ENGR00132805 MX5 MFG: enable MAX173135 and LTC3589
  * ENGR00132026 MTD: Fix MTD_MODE_RAW write fail
  * ENGR00132844 MX5x: Fix bug of UART DMA enable macro usage
  * ENGR00132832-1 MX50 SSI: fix ssi errors caused by mx5 dual fifo enable
  * ENGR00132832-2 SSI: fix ssi errors caused by dual fifo sdma script
  * ENGR00132874 Mx50: Donot change Vcc votlage in LPAPM mode
  * ENGR00132878 IMX USB:autosuspending caused device can not disconnect
  * ENGR00132885-1 Reverted the commit 8281bd8 (ENGR00132615-1)
  * ENGR00132885-2 Reverted the commit d6c3005 (ENGR00132615-2)
  * ENGR00132880 Add REGULATOR_CHANGE_STATUS ops mask for mc13892
    regulators
  * ENGR00132849-1 mx50 rdp: set power_mmc to VSD
  * ENGR00132849-2 esdhc: do not use spin_lock when set power on/off
  * ENGR00132875-1: Fix EIM IOMUX settings that break keypad
  * ENGR00132875-2: MX50EVK:Add platform specific Suspend/Resume support
  * ENGR00132877 add fixed regulator dcdc_3v15
  * ENGR00132894 usb: clk_get should not be called at IRQ context
  * ENGR00123078 L2 Switch support
  * ENGR00123741 MX28: Add IOCTL commands to L2 switch driver
  * ENGR00124252 MX28: Support Switch port0 as ethernet port
  * ENGR00126576 L2-Switch: support getting mac address from platform data
  * ENGR00132700 L2-SWITCH: Fix system hang when enable L2-Switch
  * ENGR00132935-1 fsl dev:Add pwm enable/disable pad functions
  * ENGR00132935-2 MX53 ARD:Add pwm enable/disable pad functions
  * ENGR00132935-3 MXC PWM:Use gpio when inverted pwm keeps low
  * ENGR00132882 MXC V4L2 capture:Check slave is present when open dev
  * ENGR00132776 LDB:Add default 1080P split mode for DI1
  * ENGR00126874 backlight:Fix backlight value can't keep after suspend and
    resume.
  * ENGR00132971 Workaround for imx5x M4IF burst len errata for armv7 neon
  * ENGR00131644 PMIC: Charger removal may not be detected
  * ENGR00132990 MXC V4L2 capture:Check zero width/height in VIDIOC_S_FMT
  * ENGR00132538 MX53: Get the CAN clk via dev_id and con_id
  * ENGR00122832 MX28: Support for IEEE 1588 interface functionality
  * ENGR00133149 MX50: external speaker amp shutdown
  * ENGR00133150: Fix early_param setting for 2.6.35 kernel
  * ENGR00133183 MX50 EVK: Support PWM LCD backlight
  * ENGR00133261 MX53 EVK:Correct PWM backlight frequency
  * ENGR00131983-1 MTD: Fix wrong check register_blkdev return value
  * ENGR00131983-2 UBIBLOCK: Fix crash when run ubiattach
  * ENGR00133034 ipuv3: fix black flash issue during high resolution video
    playback
  * ENGR00133268 MX28: DVFS support mDDR
  * ENGR00127010-1 mxs i2c: make i2c addr handling be compatible with i2c
    framework
  * ENGR00127010-2 mxs: change i2c device address
  * ENGR00133429 MX51 DVFS_PER: Set LP voltage to 1.25 V
  * ENGR00133440 mx23/mx28: add CONFIG_I2C_CHARDEV in defconfig
  * ENGR00133178-1 NAND : add set_parent()/set_rate() for GPMI
  * ENGR00133178-2 DMA : remove mutex for each channel
  * ENGR00133178-3 NAND : add ID infomation for ONFI nand
  * ENGR00133178-4 NAND : add is_onfi_nand field for nand_device_info{}
  * ENGR00133178-5 NAND : add device info for ONFI nand
  * ENGR00133178-6 NAND : add extra_init() hook for ONFI nand
  * ENGR00133178-7 NAND : set proper ECC parameters for ONFI nand
  * ENGR00133178-8 NAND : add ONFI NAND commands
  * ENGR00133178-9 NAND : add ONFI init code
  * ENGR00133178-10 NAND : add ddr_clk for imx50
  * ENGR00133309 NAND : fix compile warnings for GPMI
  * ENGR00133442 NAND : remove redundant clock operations
  * ENGR00133310 NAND : update the mtd->ecc_stats when reading page failed
  * ENGR00133478-1 IMX USB:move clk_enable from irq context to thread
    context
  * ENGR00133478-2 IMX USB:move clk_enable from irq context to thread
    context
  * ENGR00133485 mx28: low speed device doesn't be supported at otg port
  * ENGR00132537-1 - EPDC fb/PxP: Support conversion from grayscale to
    monochrome
  * ENGR00132537-2 - Firmware: Added new 6.0" V220 waveform file, renamed
    others
  * ENGR00132537-3 - MSL: Add 6.0" V220 panel, update other E-Ink panels
  * ENGR00132954 - EPDC fb: SET_TEMPERATURE causes hang
  * ENGR00133489 IMX USB-OTG:usb otg host mode wakeup may not work
  * ENGR00133377 mx28: fix system suspend twice issue
  * ENGR00133511 MX28: Fixed 1588 clock divider setting error
  * ENGR00133380 FEC: Fix dhcp failure at i.MX28 EVK
  * ENGR00133580 PMIC: Configure battery driver as a module
  * ENGR00133590 UART: let user control HW flow control
  * ENGR00133595 NAND : fix the wrong position for ONFI-nand's Block-mark
    swapping
  * mtd: add init_size hook for NAND driver
  * ENGR00133626 MX51: Enable battery charger on i.MX51 babbage
  * ENGR00133681 VPU:Fix kernel dump when VPU doesn't use IRAM
  * ENGR00133345-1 IPUv3 VDI:Support bottom field first setting
  * ENGR00133345-2 V4L2 output:Support bottom field first video
  * ENGR00133635 mc13892, fix pmic ADC issue and lost irq issue
  * ENGR00133318-1 IPUv3 CSI:Support SMFC channel interlaced scan order
  * ENGR00133318-2 MXC V4L2 capture:Correct TVin PAL/NTSC video formats
  * ENGR00133318-3 MX53 EVK:Set TVin pwr gpio to be output in io_init
  * ENGR00133749: NAND: Remove the 2G limitation from NAND driver
  * ENGR00133737 MXC SDMA: fix system hangs when play audio with irq
    threaded
  * ENGR00122167-1 ipuv3: adding VGA support.
  * ENGR00122167-2 TVE-VGA: adding VGA support.
  * ENGR00122167-3 MSL: add VGA support and fix TVE clock issue.
  * ENGR00122167-4 V4L2 output: changes for TVE-VGA support.
  * ENGR00133848 imx51 MSL uart: change uart default parent to pll2
  * ENGR00133954-1 MSL: remove FB_SYNC_EXT flag
  * ENGR00134116 MX5 MFG: disable battery driver
  * ENGR00133954-2 ipuv3: remove FB_SYNC_EXT flag
  * ENGR00132543 v4l2 output: fill black in streamoff
  * ENGR00134076 ipuv3: should not set burst size again

 -- Ike Panhc <ike.pan@canonical.com>  Tue, 18 Jan 2011 17:10:14 +0800

linux-charlotte (2.6.35-0.0) maverick; urgency=low

  * Initial branch

 -- Ike Panhc <ike.pan@canonical.com>  Wed, 12 Jan 2011 11:34:52 +0800
